Hexagon Measurement Systems
No matter what Hexagon measurement equipment or software you use, we want to hear your ideas and suggestions on how we can improve.
Thanks for your assistance in helping us shape the future.
as a programmer I would like to graphically visualize the angle or distance that will be evaluated
as it works in other software, such as Polyworks, Quartis etc.
See attached video.
Option to make 3d PDF report, based on point-cloud measurements. Same as on image, but in PDF, or something else readable by users who don't have pcdmis.. Maybe export as step model with this measured values. It's much productive to look at measurements by engineers, and it's easier to create report (for complex models) instead of cad only option.
SoildWorks added a Icon color option. The option is to be able to change the Icons color from Default to Classic. Maybe they could do this with PC-DMIS to have a Icon color option.
A function / icon inside PC-Dmis to change from online / offline.
Let say you have more than one program running and you switch between them and want to do a test run program by program...
Adding the functionality of AUTODESK INVENTOR CAD files to generate de program in PC-DMIS using PMI/MDB/GD&T like CAD files from CATIA
When calibrating a longer probe, have PCDmis automatically avoid colliding with the bridge support legs of the frame when indexing for the next angle. Although you can specify the order of calibration, it would be a nice feature to have the machine alarm or automatically avoid this collision in the first place.
Need to add a construct Max/MIN Point option which can be either be Max Or Min point from an input scan or constructed curve. A lot of customers need to find the highest or lowest point from a scan and the current method of using the MAX or MININDEX to get the scan point number and then constructing a generic or cast point is tiresome. The user should be able to pick a scan or curve, select which axis (based on current alignment) either X or Y or Z and indeed Polar radial for 2D max/min or 3D Max/Min from the current origin.
For example to find the max polar value the user needs to know the syntax below, the software should do this for us.
This option could also be used for constructing a point from other features such as a plane to then report the XYZ location of the highest/lowest point on the plane or any other feature in fact. etc
it would be a good idea to be able to adjust BOTH 'before' & 'after' when using avoidance moves on the same feature.for example, you might want a before distance of 40 but an after of 80.
Add a checkbox to construction dialogs allowing the user to select whether or not to construct the new feature based on hits (<featurename>.HIT[1..<featurename>.NUMHITS]) or the "regular" way (centroids). This would enhance the programming experience and shave off a couple of minutes to the programming time.
خدمة دعم العملاء من خلال UserEcho