I've never been a fan of star probes. Not to say that I haven't used them. It's more that I haven't figured out the trick to consistently and easily orient the 'star' on a TP 20 setup. Worked with a Zeiss with a Vast head for a few years. That was somewhat manageable. Seems to me that you would need some kind of hardware solution for this. Some kind of rotatable element to go in between the TP20 and your probe head. Wouldn't have to rotate 360 degrees. 90 degrees of rotation would probably be enough.

When using the search function, a toggle box would be present to ignore searching for text in constructed features.

how to use the T option?

Is there a setting in PC-DMIS that would make only the labels that are in the line of sight visible?

For Example:

If I checked one point on each of the six sides of a cube, then put my screen in ISO view, I would only see the three labels for the points that were on the 3 sides of the cube that were visible to me on the screen. If I rotated the cube around, then the other labels would appear as their respective surfaces appeared and the labels that I originally saw would disappear when their respective surfaces went out of view.

Another way to say this might be that the labels would not show through the model. They would only be visible if they were on the operator side of the model.

most threads are right hand threads so why not make pitch direction (+/-) automatic regardless of direction checked (CW/CCW) or add a note next to the pitch box positive for RH thread negative for LH thread

Add a button to reset Favorites. I had a few favorites, and remove some of them and I still have one which I can not remove.

This would help users with legacy dimensioning to capture the Per Unit answer and send to stats.

I'd like to see a button in Probe Utilities that acts similar to "Mark Used" that would select all uncalibrated tips in the active tip list. Looks like there's room for 2 more buttons.

Maybe call it "Mark Uncalibrated"