Gostaria que o Software desse a opção de Ativar o alinhamento de cada elemento avaliando , por exemplo eu tenho um perfil de superficie em relação a Datum A gostaria de poder alinhar minha peça apenas clicando no Datum A como outros softwares ja fazem , avaliação de Pattern de furos aonde conforme descrito na ASME 14.5 o valor que sai e o maior cilindro que se afasta da nominal, na verdade precisamos de mais suporte em relação a ferramenta FCF pois infelizmente não temos retorno sobre nossas duvidas.

A quick and simple way to import multiple legacy files (SV, G-Tube, DOCS) would be greatly appreciated by existing customers who are upgrading from legacy software to TubeShaper and they already have a massive collection of tubes.

I would like inspect to have its own report window open when the program is finished or a simplified display showing the measurement results. Having to save to a pdf or excel file in PC DMIS and opening it in inspect has been very buggy so I don't use Inspect. A window popup like pc-dmis would be nice. The overlay that shows so many dimensions in and so many out but doesnt say which ones and by how much doesn't do a whole lot of good for anyone.

In my programs Routines I use different "Marked Sets"

The execution time is not calculated corretly in the "Marked Sets"

The "PC-DMIS" should gives the correct time "Marked Sets"

When displaying transparent Analysis views over a CAD-object in custom reports, it is very time consuming to get the scale and orientation right. As these properties must exist on the CAD-object, it would be very good if the Analysis view could (be told to) pick up those values. I would still need to translate the image to the right place, but that's the easy part.

It would also be nice to have the Scale of the CAD-object as a visible (modifiable) property, to make it easier to get all CAD-object in the right size.

It would be nice to have a statement like this that would not stop the program.

Currently a generic feature has to be created to output this information.

Sometimes the labels get in the way when you are rotating the cad model around. It would be nice if the labels turned off if the measured feature was not visible. Know you can turn them on and off but sometimes it's a pain to turn off all the labels of features that are on the other side of the part.

It often happens, that the user forgets or omits to install the Language Pack. The local AE’s told me that it will be helpful if during the installation (probably last step) the installer requests to indicate the location of the Language Pack (you should allow to skip, but at least the user is warned that the language pack has not been installed).

Similar to STI, have the ability to organize programs into subgroup catagories or folders. This would greatly help cmm operators find a program quickly when there are hundreds of programs to select from.

Have the feature point symbol default to the current tip size. Handy if you are working in tight spaces. Probably should retain the ability to make it whatever you want; just add a current tip size check box. I know you can change it in CAD and Graphics setup/ Symbols but I'm lazy...... :)