ASME Y14.5-2009 7.6.2.3 Coaxial Features Without Datum References

This is an ability that I would like to see in PC-DMIS Xact-Measure.

If the call out is per the spec then PC-DMIS should abide by the standard.

AYNI DELİKTEN FAZLA OLDUĞU ZAMAN TABANA DOKUNUP AYNI TABANDA OLAN DELIKLERI 'SHIFT' E BASARAK SİLİNDİRMİ YADA DELİKMİ OLDUĞUNU SEÇERKEN HATVE (PİTCH) DEĞERİ GİREMİYORUM  BUNUN EKLENMESİ GEREK..

As it stands now. .xlsm (macro) is not an option and .XLSX is the new version but, does not work correctly.

.xlsm is 1997 version. I have worked with these sheet forever and the new PCDMIS wizard does not even

work anymore.

Automatic angle feature does not work in holes with an angle?

Automatic angle feature does not work in holes with an angle

Optiv machine equipped with cws 1mm can generate COPs that shall be used to calculate roughness dimensions.

Actually the processing of the COPs is made with an additional external Software.

An implementation of the roughness in pcdmis would make this measurement less complicate and reduce Costs for external Software (Mahr).

Would like to take "sample hits" in diameters and then scan with the updated size/location.  Sometimes a diameter is allowed to vary drastically but still needs scanned.  Maybe something a little more elegant than measuring a 3 point circle and updating from it.

Why can't I use the "A-B" cover for concentricity and coaxiality?

References are circles and cylinders.

I'd like to be able to search for a given feature in the ClearanceCube Definition Status Tab.   Scrolling thru a mile long list is not fun.   In an ideal world,  if the Clearance Cube Definition Status tab was open clicking on a feature label in the graphics window would take you to the feature in the Status tab.

When using the 'To points' option in an autofeature, you can give in the name of the plane. In this case 'PL_A3'.

When 'To points' is ticked and you press 'Create', then you will get seperate points with a constructed plane called 'PL_A3'.

The points are named like the last saved featurename for a point.

But I want them named 'PL_A3_PT1, 'PL_A3_PT2', etcetera.

At this moment I have to make a point and call it 'PL_A3_PT1' and make the ID default, and then delete it.

Is it possible that you get something like a popup in wich you can input the name of the first point?

And as a bonus, can you add in that popup the question if you want place the points in a group and what the name of that group should be.

Thanks.

Gr. Wesley.